woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 17, 2017 20:51:41
MALEKKO VOLTAGE BLOCK
8 independent 16-stage CV sequencers packed with performance features and presets makes the Voltage Block the ultimate CV control tool.
Create quantized or unquantized sequences for each output, record your modulation changes, tie sequences together, mute on the fly, randomize your outputs and so much more. The Voltage Block can be used stand-alone or pairs well with Varigate 4 and especially Varigate 8+ to share clocking and preset save/recall.
All in 20hp.
Features include:
8 channels + 16 stage per channel of CV modulation
Save and recall presets
Live slider/automation recording
Scale selection per output or unquantized 0-5V
Interpolation option for each step for smooth or stepped modulation
Offset and attenuation for CV input
Clock and CV operation modes
Sequence length can be set from 1 to 16 steps
Clock can be divided by up to 16
Randomize all outputs per step
Easy control over stage length
Rest/Hold gate input
Glide per stage
Forward, Reverse, Pendulum or Random directions per channel
Mutes per channel
Mutes per sequence stage
Tie presets together for “Song Mode”
Can be linked to the Varigate 8+ to share clocking and preset save/recall (up to 100 presets)
Clock in
$349
°°°ACTS 4:12°°°°
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 17, 2017 21:16
BIT BOX
Playback of up to 16 simultaneous samples from internal memory or up to 4 samples directly from microSD
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Import or export WAV files with your Mac or PC using a microSD card
24-bit 48kHz stereo input and 4-channel output
Make recordings up to 4 hours in length
Various launch modes, including one-shot, toggle, gate, and repeat5
Playback can be immediate or synchronized to analog or MIDI clock
Control of various sample parameters, including start position, length, pitch, gain, loop mode, and launch quantization
Stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Save and recall up to 12 different banks of samples and their configuration
4 modulation inputs each capable of launching an entire row of clips at once or modulating sample start, length, or pitch
Export your sets to Ableton Live
Accepts TRS MIDI input compatible with Arturia and other products
$599°°°ACTS 4:12°°°°
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 18, 2017 15:29
ELOQUENCER (cv/gate sequencer)
- 8 V/oct CV Output
- 8 Trigger / Gate Output
- Reset Input
- External Clock Input (configurable. i.e: can be used as a clock divider / multiplier)
- Accent Output (configurable)
- Clock Output (configurable. i.e: can be used as a clock divider / multiplier)
- 2 CV Input (assignable to different parameters)
Main Features:
- Pattern lenght independent for each track and pattern
- Gate probability independent for each step
- CV, CV Probability, and CV Probability Range adjustable for each step or track.
- Gate Lenght, Gate Probability, and Gate Probability Range adjustable for each step or track.
- Ratcheting Type, Ratcheting Type probability, and Ratcheting Type Range adjustable for each step or track.
- Tempo and shuffle adjust
- CV Outputs quantizable in tone / scale
- Different step modes ( ping pong, 3f2b...) independent for each track and pattern.
- Fill in mode (pressing the track button will increase a desired amount of probability of any of the parameters).
- Quantized Live recording (Cvs and Gates)
- Song Mode (For arranging patterns)
- LFO Mode
- Mute Mode
- Integrated microSD card reader to save projects, do back ups of your projects, and have different cards with different sets.
- Open Source - the program can be modified using the Arduino IDE and a USB cable.
- and more...
No price as of yet...
°°°ACTS 4:12°°°°
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 18, 2017 15:37
ERICA SYNTHS.... Black Wavetable Vco
3 ROM chips with 4 wavetables of 16 waves each Expansion ROM chips with extra waves
VC wave-surf
Suboscillator output
3 suboscillator waves (-1 or -2 octaves) per bank
Adjustable bitcrush
2x12bit DACs
Protection against reverse PSU connection
Input protection against over voltage
$246
°°°ACTS 4:12°°°°
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 18, 2017 15:45
TheHARVESTMAN...... BIONIC LESTER 2
BIONIC LESTER MARK II is a dual switched-capacitor filter. Each 2-pole filter section has an attenuverting mixer for its three outputs: lowpass, bandpass, and a selection of either allpass, notch, or highpass. Both sections may be patched in series, or routed (cable-free) in parallel with a balance knob on the mix output.
Because Bionic Lester is a discrete-time system, you may wish to engage the anti-aliasing filter that will enable typical filter behavior for that section. You may also disrupt the high-speed filter clock by logically processing it with the clock from the other filter section.
The resonance control is shared between both sections. The input amplifiers are hot and will distort the filter, with the distortion (and resonance) characteristic depending on the filter’s output mode selection.
°°°ACTS 4:12°°°°
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 18, 2017 15:51
OPEN SOURCE LABS XOX HEART
The x0x Heart PCB by itself is the heart of the infamous TB-303, surgically extracted to be transplanted into your designs. The x0x Heart is the analog section of the TB-303, replicated with SMT components, and made small enogugh to fit behind a Eurorack front panel.
The Eurorack module pins out all of the knobs of the x0x Heart, and allows for CV control of frequency, gate, accent, slide, env-mod, decay, and cut-off. There are also switches for waveform select, external audio input, and outputs for both the VCA and VCF.
Available as DIY or Preassembled
$303
°°°ACTS 4:12°°°°
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 19, 2017 19:03
INTELLIJEL PLOG
The Plog module comprises two programmable logic sections (select one of six different 3 input boolean logic types) as well as a toggle flipflop and data flipflop block. all four sections are linked together via specially planned normals.
Features:
Dual 3-input logic blocks. input z is normalled to input y and y to x in order to allow 2-input and 1-input logic modes.
Bi-polar voltage control of the logic types for section a and b with dedicated attenuators (positive voltages move the type forward, negative in reverse) inputs x and y from logic block a normalled to inputs x and y of logic block B. Output B normalled to input of the toggle flipflop via jumpered normal (can be removed) on back of pcb.
Toggle flipflop has dedicated pushbutton for manual triggering of toggle state -if you hold the trigger button for about 1 second it will disable the trigger input jack and become a simple tap clock.
Output of t flipflop is normalled to clk input of d flipflop (inverse output of dflipflop also internally normalled to d input) so that by default the d section also acts as a toggle. this allows /2 and /4 clock dividing.
You can save or load the logic section as a preset for easy recall of patches.
Module can be run at audio rates in order to generate interesting digital sounds.
This module was primarily designed as an interesting tool to be used with sequencers. you can derive complex rhythmic sequences from basic sparse sources (e.g. from a simple gate sequence or clock). by adding vc control of the logic types via some kind of cv source like a triggered envelope, lfo or sequencer you produce even more complex results.
Plog can also be used in many other creative applications including making interesting timbres and for self generating patches.
[personal note.... i had this module and the best way i can describe is.... like a clockwork machine with different gears that all interact .... i like random generative evolving patches and this really brought it all together both with reagrds to ramdom tempo and almost cubic style arp progressions.. small module but it became the center peice of my sequencing... think MATHS BUT WITH CLOCKS and such]
°°°ACTS 4:12°°°°
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 19, 2017 19:13
INTELLIJEL DR OCT 2
Just like the original Dr. Octature the basis of the module is a 4-pole lpf inspired by the classic “cascaded ota” design, but realized instead with superior-quality 2164 vcas.
The sound is very reminiscent of classic yRoland filters such as the one found on the SH-101 or Jupiter-6.
The “octature” refers to the 8 distinct, phase separated outputs (every 45 degrees, or two sets of four 180-degree shifted outputs). each pair has a different slope: 6db, 12db, 18db and 24dB.
This filter was designed by David Dixon with a special resonance distribution mode called "QUAD" that results in an especially fat and warm LPF sound that is consistently balanced with respect to the resonance on all 8 outputs.
When oscillating this filter becomes an excellent clean sine wave VCO capable of tracking over several octaves. It can also operate in LFO mode where the phase shifted outputs become extremely useful for creative modulation. Use it to make your Planar spin in circles for example!
New in this version is an input soft clipping circuit to help warm up and boost sounds before filtering them.
[personal note.. the lfo feature of this module i found excellent for evolving textures a great for manipulating a stereo patch aswell.. and the sine wave when self oscillating is really sweet sounding and perfect for fm due to thevery clean waveform.. miss it a lot....ps you can mix outputs of this module to make other variants of filter type...mixing inverted phases together and when using it as a sine.. the res cv can be used as a vca for the sine wave as well..quite an exstensive feature set for a filter.. ]
$280
°°°ACTS 4:12°°°°
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 19, 2017 19:42
MAKE NOISE MATHS....
shhhhhh!,,,, you had me at dual function genrator ......
TBH this module is actually more a way of life and to even attempt to summarise it into a simplified form would be as great an effort as the first carbon neutral,unassisted breathing,transgender vegan attempt to hop up the north face of everest..... i have my suspicions that even tony at make noise doesnt fully understand it does himself..seriously
$JUST BUY IT.... TRUST ME°°°ACTS 4:12°°°°
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 19, 2017 20:11
MALEKKO BORG 1 resonant 12db state variable vactrol filter and Low Pass Gate
12 db resonant vactrol filter
hipass6
lowpass
bandpass (but more like a notch)
LPG utilisng vactrols
two inputs
two outputs one slightly louder
Key Input
CV in
[Personal note.... everything bout this filter should be wrong.... doesnt track , filter doesnt full open, needs an offsett or cv into it, goes subsonic. Ie cuts off.. and due to the vactrols used it doesnt follow quick cv speeds.. but when wrapped up together it makes for a very warm and smooth filter thats got real balls and scraming acidic resonance. And sounds like it ca,me from the 1970's..plus the lpg side is great for bongos]
$Second hand as discontinued....
°°°ACTS 4:12°°°°
Nectarios
Martian Arts
Started Topics :
187
Posts :
5292
Posted : Feb 20, 2017 12:52
Are you back?!
Adding Modcan Touch Sequencer. 4 tracks of 64 steps with glide and gate length per step and independent track length, with brilliant scales and saving all data, in 21hp.
woodster77
IsraTrance Full Member
Started Topics :
119
Posts :
1733
Posted : Feb 20, 2017 14:05
Not back bud.. just dropping by to drop of some module porn for the peeps.....
Still got 6u 84hp... but mostly using Mutable Elements.. bezt reverb i ever heard. Not the same one in Clouds. Tho the clouds on is based on it... he should make a reverb module with that thing alone..
°°°ACTS 4:12°°°°
Nectarios
Martian Arts
Started Topics :
187
Posts :
5292
Posted : Feb 21, 2017 10:59
Yeah, I almost bought the Dervish for the reverbs, but just got a couple of Lexicons (MPX-1, MPX 500) that I found for dirt cheap.
I would not mind a euro reverb though with lots of CV...might get an ErbeVerb. But I have the 4md DLD on the way and space in the 24U is now very tight...
http://soundcloud.com/martianarts
