| Author
|
using traktor
|
TuK
TuK
Started Topics :
41
Posts :
228
Posted : Jul 13, 2007 00:56
|
hey fellows,
i just started using traktor, but i cant get it to rout good.i want to be able to use my headphones to monitor like in a real mixing deck, now i hear everything through my monitors and my headphones the same.i tried playing around with the outputs in traktor but i still cant get it to work.
i use fireface 400
thanx in advance
|
|
|
Pypedream
IsraTrance Junior Member
Started Topics :
45
Posts :
245
Posted : Jul 13, 2007 07:22
|
I'm not too familiar with the I/O on the Fireface 400. If the soundcard uses a virtual mixer or console, you may need to use a virtual send to allow traktor to "see" the outputs.
I use an E-MU 1820. There are a few other things you should know. From the prefernces menu, adjust the deck cache size to at least 32MB or 128MB depending on your RAM. It is set to default 8MB. Do not trust the auto-detection or analyze functions for BPM. To be precise you will need to learn how to beatgrid your tracks manually. It takes 1-2 minutes per track after you get it down. Check to see if your headphone output is also the channel 1/2 output. Make sure your main outs are assigned to the master. Play around with all configurations you can until you get it - you eventually will find it. Good luck.
 ELECTRON EYES / MARK-EVAN (NOR. CAL)
WWW.SOUNDCLOUD.COM/MARK-EVAN |
|
|
|
TuK
TuK
Started Topics :
41
Posts :
228
Posted : Jul 13, 2007 11:01
|
|
i got it to work half good.i can now monitor through my headphones but i still hear the main output through them. |
|
|
|
PsyUNIT
IsraTrance Junior Member
Started Topics :
17
Posts :
293
Posted : Jul 19, 2007 12:16
|
|
TuK
TuK
Started Topics :
41
Posts :
228
Posted : Jul 19, 2007 12:28
|
i got it to work it was something with the buit-in mixer in my soundcard.
thanx anyway |
|
|
|
