| Author
|
triyng to achieve an idea for a kick i have in mind
|
orbit
IsraTrance Full Member
Started Topics :
71
Posts :
108
Posted : Dec 21, 2005 02:04
|
hi there
trying to achieve a particular effect with my kicks at the moment. basically im wanting the first peak ( the high frequencies) to be fairly small but then i want the kicks lower freqs to increase so the most of the dB peak of the kick is in the lower freqs. can i do this with compression? if so what are some guidelines i can follow? or any other suggestions to get this?
  .:TO INFINITY AND BEYOND:. |
|
|
|
Freeflow
IsraTrance Full Member
Started Topics :
60
Posts :
3709
Posted : Dec 21, 2005 02:23
|
try a equalizer....
cut the high freq and boost the low freq..
though sometimes not so easy to get a good result..
you can also edit the sample...
reduce the peak by lowering its amplitude, and increase the rest.... and maybe lower the pitch of the kick a little
so you dont need to Eq or compress... often if you are happy with a sample its best to edit the sample manually, instead of making a complicated process of it... cause when you use a eq its hard to get it as narrow as you want it... (though its worth trying a FFT filter, they are very narrow) |
|
|
|
fregle
IsraTrance Junior Member
Started Topics :
11
Posts :
982
Posted : Dec 22, 2005 20:04
|
|
EQ and compression, and in that order. The compressor will emphasize the loudest frequencies, and with the EQ you can cut untill the frequencies you want are the loudest frequencies. |
|
|
|
illusions
Erebus
Started Topics :
40
Posts :
626
Posted : Dec 22, 2005 21:05
|
|
i think soundforge has an amp envelope option .use that - work with the attack length. |
|
|
|
fregle
IsraTrance Junior Member
Started Topics :
11
Posts :
982
Posted : Dec 22, 2005 21:34
|
|
