Trance Forum | Stats | Register | Search | Parties | Advertise | Login

There are 0 trance users currently browsing this page and 1 guest
Trance Forum » » Forum  Production & Music Making - The cubase sketch is done. whats next?
Share on facebook Share on twitter Share on StumbleUpon
Author

The cubase sketch is done. whats next?

idka
IsraTrance Junior Member

Started Topics :  24
Posts :  243
Posted : Jun 25, 2007 20:24
ok so i have the track ready on cubase.

i have tried different audio mixdowns butt it sounds teriblle (mastering?...) or it sounds not that teriblle when its mixedown to a wave file which is hugh (75 mb).

so what DO i do next?
          www.myspace.com/metaverse1800
Colin OOOD
Moderator

Started Topics :  95
Posts :  5380
Posted : Jun 25, 2007 20:29
Quote:

On 2007-06-25 20:24, idka wrote:
i have tried different audio mixdowns butt it sounds teriblle (mastering?...) or it sounds not that teriblle when its mixedown to a wave file which is hugh (75 mb).



????? you mean exporting to an mp3 sounds terrible, but exporting to a wav file sounds ok but the file is large?

That's just the way it is, although exporting to mp3 should sound ok with a high enough bitrate... and will be totally unsuitable for further processing (eg. mastering).           Mastering - http://mastering.OOOD.net :: www.is.gd/mastering
OOOD 5th album 'You Think You Are' - www.is.gd/tobuyoood :: www.OOOD.net
www.facebook.com/OOOD.music :: www.soundcloud.com/oood
Contact for bookings/mastering - colin@oood.net
dtd
IsraTrance Junior Member

Started Topics :  17
Posts :  490
Posted : Jun 25, 2007 22:20
hi idka

please try to explain your problem a bit clearer, then we can help you better.

try the following:

1) check your mix. are you happy with it? does it sound balanced? do some channels clip? probably, re-mix.
2) don't include any maximizers, multiband comps and such on your master bus. insanely-boosted L2 is evil on your master bus
3) mix down to 24bit wav (you're going to work with that mixdown further)
4) happy with the mixdown by listening to it? you should, otherwise, go back to earlier stages
5) if you want and if you think you'll able to do it, do a pre-mastering stage here, and in the end, dither down to 16bit WAV.
6) encode to MP3 if you need to

hope i was able to help a bit, otherwise, ask more

cheers           $ exp(j*pi) + 1 = 0. $
idka
IsraTrance Junior Member

Started Topics :  24
Posts :  243
Posted : Jun 26, 2007 12:39
thanx dtd it is very helpfull.

by the way, if n when its ready, soryy for my ignorance, what kind of file n what size do i upload on myspace?

thanx again           www.myspace.com/metaverse1800
knocz
Moderator

Started Topics :  40
Posts :  1151
Posted : Jun 28, 2007 04:25
Hi!

Well, if you wan't to put it in myspace just so people can listen to your music while reading you info, try a low bitrate mp3

if you wan't something with the least of quality but the bitrate to 128 Kbps. It should be enough. (I only use lower bit rates for music to be played on my cellphone, cause any quality there sounds the same..)

Like this it takes less time uploading to myspace and less time for people to download (streaming) and listen. It's algo good if you don't wan't people to download your song: if they do, it's in a lame quality.

If you wan't people to have your songs and play them, then the best quality should do it. A variable bite rate (VBR) mp3 at 320 Kbps. It takes a long time uploading/downloading, but your name won't be run down if someone hears your song in a bad quality.

I hope you understand.
          Super Banana Sauce http://www.soundcloud.com/knocz
shachar
Basic

Started Topics :  13
Posts :  402
Posted : Jul 7, 2007 15:41
first mixdown your track to big WAV file, than you can master it and convert to mp3 for upload
Trance Forum » » Forum  Production & Music Making - The cubase sketch is done. whats next?
 
Share on facebook Share on twitter Share on StumbleUpon


Copyright © 1997-2025 IsraTrance