Trance Forum | Stats | Register | Search | Parties | Advertise | Login

There are 0 trance users currently browsing this page
Trance Forum » » Forum  Equipment - Question regarding midi syncing hardware stuff
Share on facebook Share on twitter Share on StumbleUpon
Author

Question regarding midi syncing hardware stuff

davinski
IsraTrance Junior Member

Started Topics :  13
Posts :  119
Posted : Sep 15, 2013 23:24:00
hello,
i got a tempest, virus ti, kaoss pad 3 and tascam fw1082 mixer.

I would like to use the tempest as a master(bpm).
the virus ti is a desktop version so i use the midi in connected to my nord wave midi out.
the kaoss pad is connected to the tempest main out.

how do i set up my system so everythings syncs up to the tempest master clock?
          access virus ti,waldorf blofeld,korg microkorg xl, roland sh-201, clavia nord wave, korg kaoss pad 3, DSI Tempest, hohner something...
Outolintu
IsraTrance Full Member

Started Topics :  63
Posts :  1477
Posted : Sep 17, 2013 12:54
wikipedia:
MIDI devices are usually designed to be wired in a daisy chain. It is normal for a device to have both a THRU port and an OUT port and often both can be used for chaining. The THRU port transmits the information through with minimal delay and no alteration, while the OUT port sends a completely regenerated signal and may add, remove, or change messages, at the cost of some delay in doing so.

daisychain:
http://recordingeq.com/EQ/req0600/images/UNDERMIDI1.gif
remember to switch device's midi thru "on"

if your device doesn't have a midi thru:
http://www.indiana.edu/~emusic/etext/MIDI/MIDI_images/MIDI1.GIF

different approach :
http://www.vintagesynth.com/resources/setups.php

          "no one ever sweats on a plug-in" -moby
Trance Forum » » Forum  Equipment - Question regarding midi syncing hardware stuff
 
Share on facebook Share on twitter Share on StumbleUpon


Copyright © 1997-2024 IsraTrance